HS-36-Stim-LED (retired)

Buffered 36 channel stim headstage with Omnetics 44 connector and video tracking LED sockets. Includes a switch array to stimulate and record from any channel.

For use with Halo-10, Halo-10-Mini, Halo-18, Harlan 8, Harlan 12, Harlan 28 and Warp 32 microdrives.

Deliver stimulation current to microwire recording electrodes and stimulation probes with a small switch array for each electrode connection.

NOTE: First time users of the HS-36-Stim-LED are required to purchase the following items for use with Digital Lynx SX and the external stimulus device:
Blue, Red, Green or Infrared 10V Video Tracking LEDs sold separately.

  • HS-36-Stim Test Board
  • HS-XX-Stim Interface Board (specific to Digital Lynx SX model) with ribbon cable and blue jumper
  • Two 2-Pin BNCs

Blue, Red, Green or Infrared 10V Video Tracking LEDs sold separately.

  • Embedded micro-controller stores and executes stimulation sequences

  • Software controlled stimulus sequences deliver to multiple electrodes simultaneously

  • Record neural activity immediately after stimulation with DC coupled Digital Lynx SX input boards



Channels 32
References 4
Differential Stim Lines 0
Grounds 4
Mass 4.0 grams
Length 36.0 mm
Width 41.0 mm
Height 4.7 mm
Video Tracking LEDs 2 sockets
Input Connector Omnetics 44 socket
Output Connector Omnetics 44 pin
Tether sold separately
* Neuralynx is not a distributor of Omnetics parts.

Related Products