HS-18-Stim (retired)
Buffered 18 channel headstage with shielded Litz wire and µDB37 connector. Includes a switch array to stimulate and record from any channel.
For use with 16 channel microdrives.
Deliver stimulation current to microwire recording electrodes and stimulation probes with a small switch array for each electrode connection.
NOTE: First time users of the HS-18-Stim are required to purchase the following items for use with Digital Lynx SX and the external stimulus device:
- HS-18-Stim Test Board
- HS-XX-Stim Interface Board (specific to Digital Lynx SX model) with ribbon cable and blue jumper
- Two 2-Pin BNCs
Embedded micro-controller stores and executes stimulation sequences
Software controlled stimulus sequences deliver to multiple electrodes simultaneously
Record neural activity immediately after stimulation with DC coupled Digital Lynx SX input boards
Documents:
Configurations
| Configuration | Lengths |
|---|---|
| Custom tether lengths | 0.5 - 7 meters |
Specifications
| Channels | 16 |
| References | 2 |
| Differential Stim Lines | 0 |
| Grounds | 1 |
| Mass | 4.3 grams |
| Length | 28.1 mm |
| Width | 31.5 mm |
| Height | 4.7 mm |
| Video Tracking LEDs | none |
| Input Connector | Omnetics 26 socket |
| Output Connector | µDB37 |
| Tether | 3m shielded Litz wire |
Related Products
- HS-36-Stim-LED (retired)
- HS-36-Stim (retired)
- HS-18-MM-Stim (retired)