The most advanced digital high-density electrophysiology acquisition and experiment control system for 16 to 512 channels, providing the lowest noise, DC coupled, wide-band recording solution with the largest signal input range.
The foundation of the Digital Lynx 16SX system, the Digital Lynx Combo Board performs both analog-to-digital signal conversion and software controlled analog reference selection for up to 512 channels - at lower cost per channel. One Combo Board replaces one DRS/Hybrid Input Board pair.
The Digital Lynx 16SX includes chassis, 16 board backplane, SX Motherboard, power supply and optical fiber Ethernet connection. The 16 board backplane supports up to 8 DRS/Hybrid Input Board pairs for 256 acquisition channels or up to 16 Digital Lynx Combo Boards for 512 acquisition channels.
Cheetah license is transferable between systems - saving you money on all system upgrades.
|Channels||512 (32 per installed Combo Board)|
|Analog References||128 (8 per installed Combo Board)|
|Noise||≤ 1.3 µVRMS|
|A/D Converter Resolution||24 bit|
|Dynamic Input Range||±132 mV (0.1 Hz to 8 kHz) ±1 V at DC|
|Bandwidth||DC to 8 kHz|
|Common Mode Rejection Ratio||105 dB at 60 Hz|
|Sample Rates||16 - 40 kHz in 2 kHz steps|
|8-bit TTL I/O Ports||4|
|Signal Inputs||AC, DC and Hybrid AC/DC coupled|
|Front Panel D/A Outputs||4 channels through two ⅛” stereo jacks with a ±1 Volt output range|
|Power Supply||+15 V|
|Ethernet Connections||2 (Gigabit Ethernet over Fiber)|