Workstation base and all necessary items (except the wire) to create custom tetrodes, as well as twisted wire electrodes of any type.

Spins custom tetrodes faster with the “Auto Mode” operation and the save-and-load “Custom Spin Configurations” function.

Platinum Black solutions for plating tetrodes and other electrophysiology electrodes.

Gold non-cyanide (NC) solutions for plating tetrodes and other electrophysiology electrodes.

Gold pins used for making the connection between the electrode wire and Electrode Interface Board (EIB).

Gold pins used for making the connection between the electrode wire and Electrode Interface Board (EIB).

All necessary tools for connecting EIB pins to electrode interface boards (EIBs).

2x18 Mill-Max male-to-male header used to make the connection between the EIB-27 series and HS-27 headstage series.

4 piece male-to-male header set to make connections between an EIB-54-Kopf and HS-54 headstage.

A simple interface for allowing impedance measurements during electrode plating of 36 channel electrode interface boards (EIBs), with direct access to each channel.

Mass 2.2 grams

Holds any implant using the EIB-8/16/18 connector in a stereotax during microdrive implantation.

Channels 16
Grounds 2
Mass 0.2 grams
EIB Pins Large
Connector Omnetics 20 pin
Microdrives NLX 5 Drive
Harlan 4 Drive
Mounting Holes 2 x 1.3 mm

Polymicro fused silica capillary tubing with standard polyimide coating, and one poly glass cleaving stone.

Polyimide thermoset plastic tubing that serves as a guide tube for inserting electrode wires into microdrives.