Animal Interfaces: Adapters

We offer a range of adaptors so that your hardware meets your experimental needs and preferences

EIB Adapters

For connecting a headstage pre-amplifier to an electrode interface board (EIB) or a microdrive.

ADPT-EIB-16-QC-HS-16

Allows use of a 16/18 channel headstage with QuickClip® 16 EIBs.

View Page

ADPT-EIB-36-QC-HS-36

Allows use of a 36 channel headstage with QuickClip® 36 EIBs.

View Page

ADPT-EIB-54-HS-72-QC

Allows use of a 72 channel QuickClip® headstage with the Kopf 54 EIB.

View Page

ADPT-EIB-54-Kopf-HS-36

Allows use of two 36 channel headstages with the Kopf 54 EIB.

View Page

ADPT-EIB-72-QC-HS-36

Allows use of two 36 channel headstages for the EIB-72-QC.

View Page

ADPT-HS-18-PUSH-PIN

Allows nine (9) individual electrodes to be connected to one 18 channel headstage (HS-18).

View Page

ADPT-HS-18-Versa

Allows a headstage with Omnetics 26 connectors to fit the VersaDrive-4/8 microdrives.

View Page

ADPT-HS-36-GMR

Allows use of a 36 channel headstage with 30 channels of a Gray Matter Research (GMR) 60 channel microdrive.

View Page

Commutator Adapters

For connecting headstage pre-amplifiers to a commutator.

ADPT-HS-18-DUAL-PSR

Connects two 16/18 channel µDB37 headstages directly to one flex circuit cable of the Saturn Commutator or Slip Ring (PSR) Commutator.

View Page

ADPT-HS-27-PSR-36

Connects any µDB37 headstage directly to a Saturn Commutator or Slip Ring (PSR-18/36) Commutator.

View Page

ADPT-HS-36-PSR-36

Connects headstage tethers with Omnetics 44 connectors to the flex circuit cable of Saturn Commutators or Slip Ring (PSR) Commutators.

View Page

ADPT-HS-MUX-FLEX

Connects a 32 or 64 channel multiplexing (MUX) headstage to the flex circuit cable of Saturn Commutator or Slip Ring (PSR) Commutator.

View Page

Tether Adapters

For connecting headstage pre-amplifier output tethers to data acquisition input ports.

ADPT-Dual-HS-DRS

Connects two 8/16/18 channel headstages with MDR50 connectors to one Digital Lynx Combo Board, Digital Reference Selector (DRS) board or ERP-27 panel.

View Page

ADPT-DUAL-HS-MUX

Connects two 16 or 32 channel multiplexing (MUX) headstages to a single MUX port on the Digital Lynx SX-M.

View Page

ADPT-HS-18-DUAL-DRS

Connects two 16/18 channel headstages with µDB37 output connectors to a single MDR50 input on an acquisition system.

View Page

ADPT-HS-27-ERP-27

Connects the µDB37 output connector of a headstage tether to the MDR50 input of an acquisition system.

View Page

ADPT-HS-36-DRS

Adapts the Omnetics 44 output connector of a tether to the MDR50 input port of an analog acquisition system.

View Page

ADPT-HS-36-ERP-27

Adapts the MDR50 connector with 32 channels from a tether to ERP-27.

View Page

ADPT-HS-Hub

Connects up to four 8 channel headstages with MDR50 output connectors to a single Digital Lynx SX input, allowing a 32 channel DLSX to record from 4 subjects simultaneously.

View Page

Probe Adapters

For connecting probes (usually silicon probes) to headstage pre-amplifiers.

ADPT-HS18-N2T-16

Holds and connects a NeuroNexus 16 channel probe with Omnetics connector (CM/OCM/H/HC/P series) to a 16/18 channel headstage.

View Page

ADPT-HS18-N2T-16A

Holds and connects a NeuroNexus 16 channel probe (A/D/OA series) to a 16/18 channel headstage.

View Page

ADPT-HS18-N2T-16R

Holds and connects a NeuroNexus 16 channel probe (CM/OCM/H/HC/P series) to a 16/18 channel headstage. Required when reference site on probe is unused.

View Page

ADPT-HS27-N2T-16

Holds and connects a NeuroNexus 16 channel probe (A/D/OA series) to a 27 channel headstage.

View Page

ADPT-HS36-N2T-32

Connects a 3rd party animal interface (Omnetics 36) to a 36 channel headstage (HS-36).

View Page

ADPT-HS36-N2T-32A

Holds and connects a NeuroNexus 32 channel probe (A/D/OA series) to a 36 channel headstage.

View Page

ADPT-HS36-N2T-32R

Connects a 3rd party animal interface (Omnetics 36) to a 36 channel headstage (HS-36).

View Page

ADPT-HS36-N2T-64-Inline

Holds and connects a NeuroNexus 64 channel probe (A/D/OA series) to two 36 channel headstages.

View Page

ADPT-HS-16-QC-N2T-16

Adapts a 16 channel QuickClip® headstage to NeuroNexus 16 channel probes.

View Page

ADPT-HS-36-QC-N2T-32

Adapts a 36 channel QuickClip® headstages to 32 channel NeuroNexus, ATLAS Neuroengineering, & Cambridge NeuroTech probes.

View Page

ADPT-PED-128-HS-36

Connects Neuralynx 36-channel headstages to the Blackrock Microsystems® pedestal connector

View Page

nanoZ Adapters

For connecting animal interfaces to a nanoZ for electrode plating, impedance measurement and probe reconditioning.

ADPT-NZ-EIB-18

Connects an EIB-16/18 to the nanoZ for electrode plating, impedance measurement and probe reconditioning. For use with the Warp 16 Drive.

View Page

ADPT-NZ-EIB-36

Connects EIB-36s to the nanoZ for electrode plating, impedance measurement and probe reconditioning.

View Page

ADPT-NZ-N2T-16

Connects either NeuroNexus C16 or MR16 probes to the nanoZ for electrode plating, impedance measurement and probe reconditioning.

View Page

ADPT-NZ-N2T-32

Connects NeuroNexus C32, MR32 and F probes to the nanoZ for electrode plating, impedance measurement and probe reconditioning.

View Page

ADPT-NZ-Versa

Connects VersaDrives to the nanoZ for electrode plating, impedance measurement and probe reconditioning.

View Page

Silicon Probe Stereotaxic Adapters

Provides a rigid mounting rig for silicon probe adapters and headstage pre-amplifiers.

STX-HS18-16A

Delrin® stereotaxic mounting rig for adapter and compatible headstage with an end piece to secure tether placement.

View Page

STX-Nexus16-180

Provides a rigid mounting rig for one ADPT-HS27-N2T-16 and one HS-27.

View Page

STX-Nexus32/64

Provides a rigid mounting rig for one ADPT-HS36-N2T-32A and one HS-36 OR one ADPT-HS36-N2T-64 and two HS-36.

View Page

STX-Nexus64 Inline

Provides a rigid mounting rig for one ADPT-HS36-N2T-64-Inline and two HS-36.

View Page