TTL Response

__prod_name has the ability to send out a TTL pulse in response to certain events occurring during acquisition or recording.  While the responses are not extensively customizable, they are designed to provide basic experiment control functionality with the lowest latency possible.  If the TTL response functionality presented in __prod_name does not meet your needs, contact support@neuralynx.com with a description of the task you wish to perform.

__prod_name can respond to the following:

Spike Response	When a new spike is detected for a spike acquisition entity, __prod_name will output a high TTL pulse on a Digital IO device. Spike responses can be configured to only respond to specific cells (defined by Spike Sort 3D) or to any spike that occurs.
TTL Input Response	When a bit is changed on a Digital IO input device, __prod_name will send a high TTL pulse to a Digital IO output bit.

The TTL pulses are controlled by Digital IO devices.  For more information see the Digital IO section of this guide.

Some hardware systems have TTL response mechanisms included that further decrease the latency of spike and TTL input response.  See the documentation for your hardware for more information.

TTL Response Dialog
TTL Response Commands